Use the 2210 Create Device task panel to create a 2210 in the Deployment Manager database. After creating the device, you will typically perform a 2210 Learn Configuration task to update the database with information about the device configuration.
To display the 2210 Create Device task panel, click Create device from the 2210 folder of the navigation tree.
After updating the information in the 2210 Create Device task panel, click Apply to start the job. Deployment Manager creates a device in the database based on the information you entered in the Main pane. In addition, an initial configuration is created for the device (version 0) and set to a status of Incomplete. Schedule a 2210 Learn Configuration task to create an Active configuration version based on the 2210 device.
You can display the help panel for this task panel by clicking Help.
Use the Main pane to specify information about the device
to be created.
| This field... | Is used to... | It can contain... |
|---|---|---|
|
Device Name
|
Specify the name of this device in the NwDM database.
|
Up to 254 characters denoting the device name. NwDM does not check to make sure that the device name is unique, which
means that you can have multiple devices with the same device name.
|
|
IP Address
|
The IP address for this device.
|
A valid IP address or host name.
|
|
Operator ID
|
The operator ID used for accessing this device, if the device has been
configured for login protection.
|
A valid operator ID.
|
|
Password
|
The password that corresponds to the operator ID.
|
A valid password.
|
|
SNMP read community name
|
The SNMP read community to which this device belongs.
|
The SNMP read community name. The default is public.
|
|
SNMP write community name
|
The SNMP write community to which this device belongs.
|
The SNMP write community name.
|
|
TFTP Server IP Address
|
The IP address of an TFTP server with which this device can
communicate.
|
A valid IP address of a TFTP server.
|